The waterproofing compound of GUMMIFLEX membranes is made up of a mix of empty residue distilled bitumen modified with elastoplastomeric polymers based on atactic polypropylene, isotactic polypropylene, synthetic rubber and stabilizing aggregate fillers. The compound is UV rays resistant, thermally stable and very flexible at low temperatures.
The reinforcement used for GUMMIFLEX VV membranes is made up of a reinforced glass fiber which gives to the product remarkable mechanical characteristics, sufficient breaking elongation, as well as excellent dimensional stability. Such characteristics allow to use these membranes on non-particularly stressed surfaces.
The GUMMIFLEX VV membrane is treated on the upper side with non-stick filler; other finishings such as polymeric film and non-woven may also be used.The lower side is finished with PE torch-on film; other finishings such as aggregate, polymeric films, non-woven non-stick polymers may also be used.
The laying deck shall be clean, smooth and dry. For a better adhesion it may be previously treated either with VERVAL PRIMER (solvent based) or with ECOPRIMER (water based). The membrane is then laid by melting the lower side with light propane gas flame. Edges shall be overlapped, always by torch, by at least 10 cm. on the sides and 15 cm. on top so that the roofing watertightness is granted.
d for GUMMIFLEX VV membranes is made up of a reinforced glass fiber which gives to the product remarkable mechanical characteristics, sufficient breaking elongation, as well as excellent dimensional stability. Such characteristics allow to use these membranes on non-particularly stressed surfaces.
Membrana de alto rendimiento fabricada con betún destilado modificado con elastomero SBS y armadura de poliéster reforzado-estabilizado, para trabajos nuevos y restructuraciones. Estrato base de sistemas multicapa para coberturas planas según la norma EN 13707. Trabajos de cimentación según la norma EN13969.
...Membrana adhesiva de betún elastomérico SBS, con armadura de poliéster reforzado-estabilizado. Estrato base de sistemas multicapa para coberturas planas según la norma EN13707. Membrana para coberturas inclinadas según la norma EN 13859-1.
...